safe evacuation of the occupants for a mixed development building

Formulate an ERP so that it would help you to organise a safe evacuation of the occupants for a mixed development building consisting of :

• 38 above ground levels and 3 basement
• B1 is used as a retail space while B2 & B3 are used as
• 1^st to 5^th storey are shops and 6^th to 38^th storey are
• Assume it is 2 years old building
• ERP = FEP + APP + IPP Plan
• Building configuration is “Fictitious”
• ERP should not be merely “fill in the blanks”
• We need “substance” not “cosmetic”
• Using format given is acceptable; however, merely filling in the blank will not get you any extra marks.
• Must be detailed, comprehensive
• Fire Escape Plans are compulsory (include your escape direction).
• Indicate Assembly area on your site plan
• Diagrams, photographs, sketches, floor layouts and schedules shall be provided to aid or reinforce your explanation wherever you deem appropriate. Marks will be awarded

Note:

• You have to decide which evacuation model/guidelines to
• To help you in this part of the project, read up notes on Emergency Response Plan and apply the knowledge gained from the lectures.
• Action to be taken by each Fire Safety Committee member should be clearly indicated to facilitate part 2 of this course project.

ARE YOU A STUDENT? Need Assignment Writing Help Online?

Welcome Home - Best Essay Writers and Tutors Available. No ChatGPT. No Plagiarism. CLICK HERE

Fire Escape Plan:

• Have legible letterings/ symbols and fire escape routes (red colour) made clear to viewer.
• Use PowerPoint to draw the
• Show the layout of the floors in the correct Draw out the fire escape route serving every rooms/compartment for this project to all exits/ exit staircases.
• Do label every exit staircase (i.e. ES 1, ES 2), Firefighting Lobby (FFL), Smoke-Stop Lobby (SSL).
• Label shops/room with unit number (i.e. 01, 02, 03, …)
• Shall include the location of the following:
  1. FCC
  2. Fire lifts
  3. Evacuation Lifts
  4. PWD Holding Points
  5. Hose reels
  6. Fire extinguishers
  7. Manual alarm call points
  8. Rising mains (for Wet or Dry risers)
• Members should draw the assigned fire escape plan according to the above table: (e.g. an escape floor plan label as ‘L6~L38’, assume these floors have same layout)

Location Plan:

• Use only streetdirectory.com to indicate your building location plan.

Site Plan:

• Use only streetdirectory.com to indicate your site plan
• Show AA1 & AA2 location and indicate your building height (metres)
• Indicate the direct distance (metres) of the AAs from your
• Indicate the travel paths from your building to the

EAA Site Plan

• Use your own assumptions wherever necessary and when there is no information provided. You must make your assumption clear.
• Materials that are not needed should not be
• Plagiarism will cause a serious deduction in marks or immediate